- Brick making machine
- qty10-15 automatic brick m...
- qty6-15 automatic brick ma...
- 4-25 auto brick machine
- 3-25 auto brick machine
- 4-40 vibration brick machi...
- 4-35 manual brick machine
- 4-45movable brick machine
- Fly ash brick machine
- Cement bricks machine
- Paving bricks machine
- Clay bricks machine
- Clay brick extruder
- Clay Interlocking brick ma...
- AAC block line
- AAC blocks plant
- light weight blocks(AAC bl...
- Autoclave curing unit
- Raw material process
- Batching and pouring
- Curing and cuttting
- aac block cutting machine
- autoclave for aac plant
- steam boiler
- Hydraulic brick machine
- 500T hydraulic press brick...
- 630T hydraulic press brick...
- 1100T hydraulic press bric...
- steam curing brick machine
- high pressure brick machine
- calcium silicate brick mac...
- Fly ash brick autoclave cu...
- brick machine flow chart
The correct operation of fly ash brick can prolong its service life，can also avoid trouble, always maintenance and other issues. Today we talk about the correct operation of fly ash brick machine as well as some items which need to pay attention in this process.
1. Every time in the use of fly ash brick machine should check the fly ash brick clutch, brake, wire rope and other accessories to ensure its goodness. There must be no foreign matter in the drum.
2. In the operation process of fly ash brick machine,must pay attention to tools, hand and other debris are not allowed into the cylinder so as to avoid accidents.
3. In the use of mixer, the place must be stable. The mixer can not shake, with a bracket or foot cylinder frame stability. Tires are not used to support.
4. When the hopper is raised, no one is allowed to pass or stay under the hopper. After the equipment is stopped, the hopper should be fixed and then left.
5. Hydraulic parts such as cylinder, valve, valve block, oil pipe, when the oil spill, should be replaced with oil seals, seals and other maintenance methods or the whole replacement, avoid sick operation. We should always listen, see and touch when oil pump and oil motor in operation. If abnormal, must be discharged.
6. Maintain the cleaning work of the hydraulic cylinder and hydraulic system of fly ash brick machine.
7. Oil temperature should be moderate, to avoid damage to the fly ash brick machine equipment.
8. When the fly ash brick machine is overhauled, be sure to cut off the power supply.
The two most important things are the cleaning and safety of the equipment. Because the raw material is fly ash, so when the equipment operation must have raw materials scattered in hydraulic system or motor. Ensure the cleanliness of the equipment can avoid the motor temperature is too high, causing the motor burned out. Safety production is very important that every manufacturer must pay attention to. Our company hope that the customers and friends in accordance with the above requirements to run fly ash brick machine.