- Brick making machine
- qty10-15 automatic brick m...
- qty6-15 automatic brick ma...
- 4-25 auto brick machine
- 3-25 auto brick machine
- 4-40 vibration brick machi...
- 4-35 manual brick machine
- 4-45movable brick machine
- Fly ash brick machine
- Cement bricks machine
- Paving bricks machine
- Clay bricks machine
- Clay brick extruder
- Clay Interlocking brick ma...
- AAC block line
- AAC blocks plant
- light weight blocks(AAC bl...
- Autoclave curing unit
- Raw material process
- Batching and pouring
- Curing and cuttting
- aac block cutting machine
- autoclave for aac plant
- steam boiler
- Hydraulic brick machine
- 500T hydraulic press brick...
- 630T hydraulic press brick...
- 1100T hydraulic press bric...
- steam curing brick machine
- high pressure brick machine
- calcium silicate brick mac...
- Fly ash brick autoclave cu...
- brick machine flow chart
Clay brick machine:
The machine applies to clay, shale, coal gangue, fly ash, slag, mountain mud, silt, etc. as raw materials to carry out a strong mixing, vacuum processing, and then the screw auger extrusion system to produce provisions cross-section of ordinary solid bricks, hollow bricks, and other products.
In the brick making production line, the box-type feeder is mainly used for equalizing and fixing the quantity of the raw materials. It can control the feeding quantity of raw materials and proportionally mix the materials by adjusting the transport speed of belt and lifting the height of flashboard.
his grinding roller can be widely used in cement, metallurgy, chemical, electric power and coal industries for processing the brittle and tenacious materials. In brick making production line, this machine is mainly used for secondary crushing, which can make the particle size of clay, coal ash or shale, etc less more than 3 mm.
This dual-shaft mixer is mainly used for various powdery materials, such as clay, shale, cola gangue and fly ash, etc, which can well stir materials. It is the important equipment in brick making production.
Full-auto Brick Cutting Machine:
This machine is mainly used to cut mud which is squeezed into blocks by vacuum extruder during production.
Full-auto Setting Machine:
The full-automatic brick setting machine is mainly used in blank-firing tunnel kiln's hydraulic transmission, electrical control.
The full-automatic brick setting machine is formed by walking car, chuck, sub-billet, units, lifting guide rod, rail, hydraulic system and electrical system, etc.; with high efficiency energy-saving, easy maintenance, low cost, stable and reliable characteristics.
|Email to this supplier|